manualshive.com logo in svg

Rain Bird LXME2, Инструкция по установке, программированию и эксплуатации, Страница: 29 / 91

Поделиться
Скачать
Rain Bird LXME2 Скачать руководство пользователя страница 29

Current Section:

  Setup  29

 

 

 

 

 

 

Navigation:

Next

Advanced  Station Settings

Cycle & Soak

Station Delay

SimulStations

Station Sequencing

Module/Station Numbering

Done

Station

Min : Sec

00:00

Delay Between Stations

PGM 02

1 

Turn the controller dial to Setup and use the   &   keys to navigate to “Advanced 

Station Settings”

2 

At the Advanced Station Settings screen, press the   key to select “

Station Delay

”, then 

press 

 Next 

.

3 

At the Station Delay screen with “

Inter Station Delay

” selected press 

Next

.

4 

At the Delay Between Stations screen, press the   and   keys to set the time delay (from 

00:01 second to 60:00 minutes).

• 

Press and HOLD the    and   keys to accelerate settings.

• 

To clear an Inter-station Delay on that station, set to 00:00

• 

Consider using short Inter-station Delay times, particularly if your watering schedule or Water Window is 

short. Long delay times could prevent scheduled irrigation from completing prior to the end of the Water 

Window.

Use the Program Select button and repeat this process to set Inter-station Delay for other programs as 

desired.

4.4.4  SimulStations 

(Advanced Station Settings)

The LXME2 controller can be set to operate multiple stations simultaneously.

You can set the maximum number of stations that are allowed to run concurrently as well as the 
maximum number of stations an individual program can run. This can be beneficial for systems with 
a large water source and to help ensure watering is completed in the water window.

CAUTION:

The LXME2 can run a maximum of 5 stations concurrently, (limited to 2 stations per 12 Station module). 
Many irrigation systems do not have sufficient hydraulic capacity to accommodate such a load.

• 

SimulStations can be used to control the maximum number of simultaneously irrigating stations per 

program or for the entire controller. But a better alternative would be to enable Flo-Manager® and set 

program-level SimulStations to a fairly high number. This will allow Flo-Manager® to provide maximum 

irrigation based on your system’s hydraulic capacity. See “

Set Flo-Manager®

” for more details.

Содержание LXME2




























































































Отзывы:

Нет отзывов