4
2. Installation
2.4.1 Location:
IMPORTANT
The HN-G filter should be installed vertically
1.
Allow a minimum clearance of 10” (ten inches) above the HN-G for safe removal of the filter cover.
2.
Locate the HN-G filter as close to a drain as possible. This will maximize the efficiency of the automatic self-cleaning.
3.
An AC to 12VDC power source is required for the Backwash Controller if batteries
are not used (HN-G-01-1-XXX, HN-G-02-1-XXX models only).
