Rain Bird ESP-SMT, Руководство по установке и эксплуатации, Страница: 52 / 88

ESP-SMT Smart Modular Control System
47
Restore Settings
This section shows you how save the program information you have entered
into the ESP-SMT controller in memory and then how to retrieve the saved
information when necessary. This dial position also allows you to clear all
information stored in the controller and reset the controller to its original
Factory Settings.
Rotate the dial to RESTORE SETTINGS position...
Restore “Contractor Default”
Program Settings
A Press the UP or DOWN button(s)
until the
RESTORE SETTINGS FROM
Contractor Defaults
screen begins
to blink; then press the
SELECT
button.
B
The RESTORE CURRENT SETTINGS
FROM Contractor Defaults screen
will appear. Press the
RESTORE
button.
C The RESTORING TO Contractor
Defaults screen will appear with
a message that reads: Please Wait
While Unit Reconfigures.
D
While the controller is restoring
the Contractor Default settings,
the Rain Bird ESP-SMT screen will
appear until all information has
been programmed into the ESP-
SMT controller.
A
C
B
D
RESTORE SETTINGS FROM
Contractor Defaults
Factory Defaults
SELECT
FINE-TUNE
WATERING
SET DATE
& TIME
AUTO
SPECIAL
FEATURES
SYSTEM
REVIEW
INPUT ZONE
INFORMATION
CONFIGURE
CONTROLLER
MANUAL
WATERING
OFF
RESTORE
SETTINGS
RESTORE CURRENT
SETTINGS FROM:
Contractor Defaults
RESTORE QUIT
Rain Bird
ESP-SMT
Smart Modular
Controller