ESP-SMT Smart Modular Control System
39
Set Units
Allows you to assign the Time Format
and the Unit Format displayed on the
ESP-SMT screen.
N
If you would like to change the time
format or the unit format from that
currently shown on the display:
Press the
UP and Down
arrow
button(s) until
Set Units
is blinking
on the display; then press the
SELECT
button.
O
The SET TIME FORMAT screen will
appear and the
current time
format will blink. If you wish to
change the time format to an
alternate choice (For Example: from
AM/PM format to 24 Hour format):
Press the
UP or DOWN
button(s) to
the desired time format; then press
the
SELECT
button.
P
The SET UNITS FORMAT screen
will appear and the current
unit
format will blink. If you wish to
change the unit format to an
alternate choice (For Example:
English format to Metric format):
Press the
UP or DOWN
button(s) to
the desired time format; then press
the
SELECT
button.
!
NOTE:
The factory default
or
Automatic
setting
will
automatically set the time format
to “AM/PM” and the Unit format
to “English” when the ESP-SMT
controller is connected to a 60Hz
power source.
N
P
O
SPECIAL FEATURES
Event Days Off
Block One Day A Week
Wiring Test
Adv. Controller Setup
Advanced Zone Setup
Set Units
SELECT
SELECT
BACK
SET TIME FORMAT
Automatic
AM/PM
24-Hour
SELECT
BACK
SET UNITS FORMAT
Automatic
English
Metric