ESP-SMT Smart Modular Control System
37
d.
The Temp. Below:
value
will begin
to blink. Press the
- or +
button(s) to
set the desired temperature value;
then press the
NEXT
button.
!
NOTE:
The Suspend Watering
When Temp. Below XX feature
allows you to set a temperature
threshold when irrigation will be
suspended to prevent potential
freeze damage to the system
components.
Advanced Zone Setup
Allows you to assign each zone to:
• Use/Not Use a Master Valve / Pump
Start Relay.
• Use/Not Use the ESP-SMT Rain Gauge
information.
H
If you would like to set a specific zone
to use or not use a Master Valve or
Pump Start Relay and/or the rainfall
measurement information gathered
from the ESP-SMT Rain Gauge:
Press the
UP and Down
arrow
button(s) until
Advanced Zone
Setup
is blinking on the display;
then press the
SELECT
button.
I
The ADVANCED SETUP screen
will appear and the Zone Number
begins to blink;
a.
Press the
- or +
button(s) until the
desired Zone number is displayed;
then press the
NEXT
button.
b.
Use Master Valve:
YES
will begin to
blink. Press either the
YES or NO
button(s) and either
YES or NO
will
be displayed; then press the
NEXT
button.
c.
Use Rain Sensor:
YES
will begin to
blink; press either the
YES or NO
button(s) and either
YES or NO
will
be displayed; then press the
NEXT
button.
d.
G
c.
9
b.
I
I
a.
H
ADV CONTROLLER SETUP
ETo Adjust Factor
Zone To Zone Delay
Suspend Watering When
Rain Reaches
-OR- Temp Below
90%
4 Seconds
0.10in
35
°F
NEXT
BACK
Use Master Valve
YES
Use Rain Gauge
YES
NEXT
BACK
ADVANCED SETUP
Zone
6
Use Master Valve
NO
Use Rain Gauge
YES
NEXT
BACK
NO
YES
ADVANCED SETUP
Zone
6
Use Master Valve
NO
Use Rain Gauge
NO
NEXT
BACK
NO
YES
ADVANCED SETUP
Zone
6
SPECIAL FEATURES
Event Days Off
Adv. Controller Setup
Advanced Zone Setup
SELECT
Save Contractor Dflts
Set Units
Short Circuit Test