Rain Bird ESP-SMT, Руководство по установке и эксплуатации, Страница: 24 / 88

ESP-SMT Smart Modular Control System
19
Input Zone Information
This section shows you how to input information that is specific to each zone you plan
to irrigate. There are three methods to accomplish this task:
1) Zone Setup Wizard; 2) Advanced User Entry; 3) Copy Zone to Zone(s)
Method 1: Zone Setup Wizard
This method is recommended for new users of the ESP-SMT Controller.
Rotate the dial to
INPUT ZONE INFORMATION
position...
A The INPUT ZONE INFORMATION
screen will appear with the
Zone
Setup Wizard
blinking; press the
SELECT
button.
Select Specific Zone Number
B The SELECT ZONE screen will appear.
Press the
- or +
button(s) until the
desired Zone Number is displayed;
then press the
NEXT
button.
Turn Zone to ENABLE status
C
Zone
OFF
is displayed. Press the
ENABLE
button to change zone
status.
D Zone XX ENABLED is displayed;
press the
NEXT
button.
!
NOTE: You can still input zone
information with the zone in the
OFF mode. This may be beneficial
C
B
A
D
INPUT ZONE INFORMATION
Zone Setup Wizard
Copy Zone to Zone
SELECT
SELECT ZONE
Zone
3
NEXT BACK
OFF
SELECT ZONE
OFF
Zone 3
NEXT BACK OFF ENABLE
FINE-TUNE
WATERING
SET DATE
& TIME
AUTO
SPECIAL
FEATURES
SYSTEM
REVIEW
INPUT ZONE
INFORMATION
CONFIGURE
CONTROLLER
MANUAL
WATERING
OFF
RESTORE
SETTINGS
SELECT ZONE
ENABLED
Zone 3
NEXT
BACK OFF ENABLE