Rain Bird ESP-SMT, Руководство по установке и эксплуатации, Страница: 37 / 88

ESP-SMT Smart Modular Control System
32
Input Zone Information
Method 2: Copy Zone to Zone(s)
This method is useful if the conditions for one zone match other zones.
Rotate the dial to INPUT ZONE INFORMATION position...
A The INPUT ZONE INFORMATION
screen will appear. Press the
UP and
DOWN
arrow button(s) until
Copy
Zone to Zone
is blinking; then
press the
SELECT
button.
B The Copy From Zone value will
begin to blink;
a.
Press the
- or +
button(s) until the
source Zone number is displayed;
then press the
NEXT
button.
b.
The To Zone
value
will blink.
Press the
- or +
button(s) until
the destination Zone number is
displayed; then press the NEXT
button.
c.
The next destination zone will begin
to blink. Press the
- or +
button(s)
until the destination Zone number
is displayed; then press the
NEXT
button. Repeat this process to add a
third destination zone if needed.
b.
B
a.
A
B
c.
FINE-TUNE
WATERING
SET DATE
& TIME
AUTO
SPECIAL
FEATURES
SYSTEM
REVIEW
INPUT ZONE
INFORMATION
CONFIGURE
CONTROLLER
MANUAL
WATERING
OFF
RESTORE
SETTINGS
INPUT ZONE INFORMATION
Zone Setup Wizard
Copy Zone to Zone
SELECT
COPY ZONE DATA
Copy From Zone 1
To Zone
And To Zone
And To Zone
2
--
--
NEXT BACK
COPY ZONE DATA
Copy From Zone 2
NEXT
BACK
To Zone
And To Zone
And To Zone
3
--
--
COPY ZONE DATA
Copy From Zone 2
NEXT BACK
To Zone
And To Zone
And To Zone
3
6
8