5
RailKing 2-6-0 Train Set Operating Manual
RAILKING
complete the track design. You can purchase additional track
components from any authorized MTH reseller.
The lighted lockon included in
your set snaps into any RiteTrax®
track section roadbed and
functions as the interface
between the track and the
transformer. Each RiteTrax® track
section includes two “knock-out”
tabs in the roadbed (on either end
of the track) that must be removed
to reveal the opening for the lighted
lockon. To remove this
knock-out
grab the
knock-out
with a pair of
pliers and gently twist the
knock-out
until it snaps away from the
roadbed base. Once the
knock-out
has been removed, snap the lighted
lockon into the roadbed taking care
to make sure that the lockon arms
snap into the roadbed electrical
receptors. To complete the
connection between the RiteTrax®
track section and the transformer,
simply plug in the color-coded wire
harness that was included in your
set.
Knock-out
Must Be Removed
Before Lighted Lockon
Can Be Inserted
Figure 3: Top view position of lighted lockon
preparing to enter RiteTrax® section.
Figure 5: Underside view of RiteTrax® track
section with lighted lockon in fully seated position.
Remove
Knock-out
By Holding
& Twisting
With A Pair
Of Pliers
Figure 4: Underside view of RiteTrax® section
with knock-out removed and lighted lockon in
position for insertion.
Figure 6: Top view of RiteTrax® section with
lighted lockon in fully seated position.
