11
RailKing 2-6-0 Train Set Operating Manual
RAILKING
Using the Z-500 With Self-Recharging, Battery
Equipped After-Market Sound Systems
When using the Z-500 transformer with after-market digital sound systems
employing a self-recharging battery backup system, operators should be
aware MTH does not recommend leaving the engine in neutral with the
power on and the throttle above the setting shown in Figure 10 for an
extended period of time. If you are recharging the battery found in these
after-market sound systems with a Z-500 transformer while in the neutral
position, MTH recommends the throttle be positioned as shown in Figure
10 for optimum charging power.
Train Set Maintenance Instructions
Proper locomotive performance requires regular attention to
lubrication. The following guidelines should be followed to ensure that
your set’s locomotive last for many years.
Oil
Before operating the locomotive, apply a small drop of oil to lubricate
the side rods and pick up rollers. Use light household oil and apply
sparingly only to the points indicated by Figure 14. Wipe away any
excess, especially if oil spills onto the finish of the locomotive. To
prevent accidental scratches or other damage to the locomotive shell
while you are working, you may want to place the locomotive in a
repair cradle or an old towel or other cloth folded to provide a firm but
soft resting place.
Grease Gears
Lubricate Pickup Rollers
And Side Rod Linkage
Figure 14: Removing the 2-6-0 locomotive shell from the chassis.
