Raider RD-GWP03J, Руководство пользователя

Страница: 11 / 80

11
General guidelines for safe operation.
Self-priming pump gasoline RD-GWP03J is the result of many years of research in the field of
innovation and quality to ensure its reliability and excellent work. Each water pump RAIDER has
high-tech features. Besides the engine, the reliability of RAIDER cover and housing of the pump.
Healthy blades of aluminum alloy and mechanical joints ensure years reliable operation. Durable
design, powerful engine, quickly pull the water and light weight for easy portability - all contributing
to the best possible performance. Created and constructed in accordance with EU standards, it
meets all safety rules and environmental protection. However, security depends on you, so read this
instruction carefully before using the machine to learn the correct way to use and its capabilities. Read
all instructions carefully. Failure of the considered below instructions may result in fire and / or severe
injuries. Keep these instructions in a safe place. Manufacturer and importer is not liable for injuries
and damage that would result from failure of the instructions and safety techniques described in this
instruction manual.
1. Safety.
Be assured that under no circumstances, water and moisture will not reach the pump. A water jet
pump must not be aimed at people, electrical appliances or petrol pump itself. In winter conditions, take
measures against possible freezing. Not allow the use of the pump by children. Take the necessary
steps to prevent children’s access to the pump. Pump should not be included without water!
1.1. Stay in place around the pump clean and well lit. Disarray and poor lighting may contribute to
the occurrence of accidents.
1.2. Do not install the pump near the middle with an increased risk of an explosion in the vicinity of
flammable liquids, gases or powders.
1.3. Keep children and bystanders at a safe distance. Do not allow children or pets to enter the
work zone as this may increase the risk of receiving burns from hot surfaces of working parts, such
as the exhaust guard (9).
1.4. In order to ensure safety should only use genuine parts or parts recommended by the
manufacturer. Not use the pump, provided that an element of the pump is damaged.
1.5. The pump is designed so that all moving parts and housing to ensure safe conditions for use.
For damage caused by attempts to change the structure of the pump manufacturer and importer of
responsibility.
1.6. Not use the pump for pumping liquids other than water, particularly such as power, fluids used
for cleaning or other liquid chemicals.
1.7. Gasoline is highly flammable and can explode under certain conditions.
1.8. Refueling only broken engine and a clean and airy place. Do not smoke and do not allow open
flame or sparks of places is dispensed or stored fuel.
1.9. Do not allow fuel to overflow from the tank. Be sure to properly tighten the cap after filling the
tank.
1.10. When loading, be careful not to spill gasoline about as gasoline vapor can easily catch fire
and cause a fire. Do not forget to wipe spilled gasoline before starting the engine.
1.11. Avoid frequent skin contact with gasoline or breathing in gasoline money. Keep gasoline out
of the reach of children.
1.12. Do not run engine in enclosed or poorly ventilated spaces, because the exhaust gases
produced by the working engine contains toxic carbon monoxide, which can lead to unconsciousness
or even death.
2. Observe the ratio of gasoline and fuel oil mixture!
2.1. Oil is one of the main factors influencing the performance of the engine and his life. Do not use
contaminated or vegetable oils.
3. Functional description and purpose. You purchased a machine monobloc, single, self priming
centrifugal pump, driven by petrol, single cylinder two-stroke air-cooled and extended shaft which
is connected directly to the pump. Joining hoses with flanges that are screwed to the inlet opening.
Thread itself is an external pump. The pump is mounted on a frame so that it is compact and
convenient to work and move. The output of the pump is located higher than the entrance to the