34
www.raider.bg
■ It is important that the hose and coupling are of a good quality, tightly
fitted and that the seals are undamaged and inserted straight. Leaky connections can impair the
suction.
Bleeding the appliance
♦ Remove the nozzle /4/.
♦ Start the engine (see “Starting the engine”).
♦ Pull the trigger /20/ on the hand spray gun /18/ several times.
♦ Allow the appliance to run until the water comes out of the jet pipe /16/ without any air bubbles.
♦ Switch off the appliance and screw the nozzle /4/ back on.
Use
WARNING!
► Switch off the appliance before making any adjustments or carrying out maintenance work.
DANGER! RISK OF EXPLOSION! DO NOT SPRAY
FLAMMABLE LIQUIDS!
► Place the appliance on a firm surface.
► The high-pressure cleaner may not be operated by children. (Risk of accidents due to improper use
of the appliance).
► The appliance generates a lot of noise.
Risk of hearing damage. Always wear suitable hearing protect when working with the appliance.
► The water jet coming out of the high-pressure nozzle exerts recoil force on the gun. An angled jet
pipe can also cause torque. Therefore, hold the jet pipe and gun firmly in your hands.
► Never aim the water jet at people, animals, the appliance itself or electrical components.
► Vehicle tyres/tyre valves may only be cleaned at a minimum spray distance of 30 cm. Otherwise
the vehicle tyres/tyre valves could be damaged by the high-pressure jet. The first sign of damage is a
discolouration of the tyre. Damaged vehicle tyres are a source of danger.
► Materials containing asbestos or other substances that are harmful to health may not be sprayed.
► To protect the operator from water spray, wear suitable protective clothing.
► Always ensure that all hose connection are screwed tight.
► The trigger of the hand spray gun must not be jammed during use.
Filling oil/petrol
♦
The gasoline is supplied without oil. For first use, the oil should be changed after two hours
of operation.
When you use the appliance for the first time, unscrew the red oil inlet screw /34/ and add
approx. 0.6 l engine oil (15W40). Use the funnel /43/ to do this.
♦ Unscrew the filler cap /6/ and add standard commercial lead-free petrol to the fuel tank /7/. The tank
has a maximum capacity of 3.6 l. Add fuel up to the red mark.
Starting the engine
CAUTION!
► Before first use, add engine oil (15W40, approx. 0.6 l) and fuel (regular unleaded petrol).
♦ Check the fuel and oil levels; top up as necessary.
♦ Provide adequate ventilation for the appliance.
♦ Ensure that the spark plug/spark plug connector /26/ are firmly fitted.
CAUTION!
► When starting using the pull starter /17/ there can be a kickback that can cause injuries to your
hand.
■ Wear protective gloves when starting.
♦ Open the fuel tap /25/; to do this, move the fuel tap /25/ to the “ON” position.
♦ Move the On/Off switch /36/ to the “ON” position.
♦ Set the choke /24/ to position I \ I (in the left position).
Start the engine with the pull starter /17/; pull firmly on the handle to do this. If the engine does not
start, pull the starter again.
♦ After starting, push the choke /24/ back in (in the right position).
NOTE
► The procedure described in this section is suitable for both a cold start and a warm start.
Содержание RD-GHPC06
