37
hose /1/ immediately.
Before every use
♦ Check the oil level using the dipstick /34/. If the oil appears milky (water in the oil) contact customer
service immediately.
Every 50 operating hours
♦ Check the oil level using the dipstick /34/. If the oil appears milky (water in the oil) contact customer
service immediately.
♦ Clean the water filter.
♦ Clean the intake filter /31/.
♦ Check the fastenings between the engine and the frame for cracks and have any cracked fastenings
replaced by customer service.
Maintenance work
Changing the engine oil
♦ Prepare an approx. 1 litre container to collect the oil.
♦ Unscrew the oil drain screw /15/.
♦ Allow the oil to drain out into the container.
NOTE
► Old oil must be disposed of in an environmentally friendly manner or handed in to an authorised
collection point.
♦ Screw the oil drain screw /15/ back in.
♦ Pour new oil slowly into the opening on the oil inlet /34/ .
Fill the oil slowly so that air bubbles can escape. See technical specifications for oil type and fill
quantity.
Engine
CAUTION!
► Switch off the appliance immediately and contact customer service:
– If you notice unusual vibrations or noises.
– If the engine seems overloaded or misfires.
■ Keep all protective equipment, air vents and the engine housing as free of dust and dirt as possible.
Wipe the appliance with a clean cloth or blow it out with low-pressure compressed air.
■ We recommend cleaning the appliance after every use.
■ Clean the appliance regularly with a damp cloth and a little soft soap. Do not use any cleaning
agents or solvents as these can damage the plastic surfaces of the appliance. Make sure that no water
can penetrate into the interior of the appliance.
Air filter
■ Clean the air filter /5/ regularly; replace if necessary.
■ To do this, open the air filter /5/ by removing the wing nut /23/ and then
pulling out the air filter /5/
■ Remove the filter elements.
■ Do not use any aggressive cleaning agents or petrol to clean these
elements.
■ Clean the elements by knocking them out on a flat surface. In the event
of severe soiling, wash with a soap solution and then rinse in clear
water and allow to dry.
■ Assembly is done in the reverse order.
Spark plug
Check the spark plug/spark plug connector /26/ for the first time after 20 operating hours for
contamination and clean if necessary with a wire brush. Afterwards, service the spark plug after every 50
hours of operation.
♦ Pull of the spark plug connector /26/ with a twisting motion.
♦ Remove the spark plug /26/ with the supplied spark plug spanner.
♦ Assembly is done in the reverse order.
Содержание RD-GHPC06
