36
www.raider.bg
♦ For longer interruptions (several minutes), switch off the engine.
♦ Pull the trigger /20/ until the appliance is depressurised.
♦ Secure the hand spray gun /18/ against accidental activation using the trigger lock /21/.
Turning off the appliance
After use with salt water (brine) run tap water through the opened hand spray gun for at least 2–3
minutes to rinse the appliance.
♦ Release the trigger /20/ on the hand spray gun /18/.
♦ Move the On/Off switch /36/ to the “OFF” position.
♦ Close the fuel tap /25/.
♦ Switch off the water supply.
♦ Pull the trigger /20/ until the appliance is depressurised.
♦ Secure the hand spray gun /18/ against accidental activation using the trigger lock /21/.
♦ Unscrew the water supply hose from the appliance.
Transport
CAUTION! RISK OF INJURY AND DAMAGE!
► Take the weight of the appliance into account during transport.
♦ Wind up the high-pressure hose /1/ and place it in the hose holder /3/ .
♦ Place the jet pipe /16/ into the lower spray gun holder /13/. Hang the hand spray gun in the upper
spray gun holder /19/ .
♦ Push the appliance by the handle A.
♦ When transporting the appliance in vehicles, secure the appliance against rolling away, slipping or
tipping in accordance with the applicable guidelines.
Storage
CAUTION! RISK OF INJURY AND DAMAGE!
► Take the weight of the appliance into account when storing.
■ The appliance may only be stored indoors.
Frost protection
CAUTION! RISK OF DAMAGE!
► Freezing water in the appliance can destroy parts of the appliance.
► Preferably store the appliance in a heated room in winter. When storing in an unheated room,
comply with the following instructions:
Drain the water
♦ Unscrew the water supply hose and the high-pressure hose /1/.
♦ Run the appliance for max. 1 minute until the pump and the lines run dry.
♦ Unscrew the water filter and empty it.
Flush the appliance with antifreeze
NOTE
► Follow the handling instructions of the antifreeze manufacturer.
♦ Pump a standard commercial antifreeze through the appliance. This will provide a certain level of
corrosion protection.
Cleaning and maintenance
NOTE
► The maintenance schedule below lists only maintenance work on the high-pressure pump. In
addition, maintenance work on the engine must also be taken into consideration.
DANGER! RISK OF INJURY DUE TO ACCIDENTAL STARTING OF THE APPLIANCE.
► Before working on the appliance, turn the engine switch to “0/OFF” and pull off the spark plug
connector.
► RISK OF BURNS! Do not touch the hot exhaust silencer, cylinder or cooling fins.
Maintenance intervals
Before use
♦ Check the oil level using the dipstick /34/. If the oil appears milky (water in the oil) contact customer
service immediately.
♦ Check the high-pressure hose /1/ for damage (risk of bursting). Replace a damaged high-pressure
Содержание RD-GHPC06
