Ragazzini RC2-Mxl, Инструкция по эксплуатации

Страница: 42 / 47

INSTRUCTIONS FOR USE
42
LM05EN002
K DEMOLITION AND DISPOSAL
K.1 GENERAL WARNINGS CONCERNING DEMOLITION AND DISPOSAL OF THE
MACHINE
WARNING: Machine demolition operations must be carried out in a non-explosive atmosphere.
K.1.1
Special and hazardous waste

Special waste means residues deriving from industrial processes, materials from the demolition of
machines and of deteriorated and obsolete equipment.

Hazardous waste is waste generated by production activities and containing a significant quantity of
pollutants.
WARNING : Disposal of special waste and hazardous waste must be carried out in compliance
with statutory legislation. For Italy comply with Legislative Decree 3/4/2006 n. 152, modified by
Legislative Decree 3/12/2010, no. 205 and subsequent amendments and additions (“Provisions
implementing directive 2008/98/EC”).
K.2 PERSONAL PROTECTIVE EQUIPMENT REQUIRED DURING MACHINE
DEMOLITION AND DISPOSAL
The operator responsible for the demolition and disposal operations must use the following personal
protective equipment:
Pictogram Description Note
FOOTWEAR Use of safety shoes to avoid the risks generated by falling materials.
PROTECTIVE GLOVES
Gloves for hand protection available in case of manipulation of objects that
can cause damage or injuries.
HELMET
Protective helmet to be used during machine hoisting operations to prevent
the dangers generated by hanging loads.
SUITABLE CLOTHING
Suitable clothing, such as overalls: it is prohibited to wear wide sleeves
and/or loosen clothing that could be easily caught in mechanical parts.
K.3 MACHINE DISMANTLING
The qualified and authorised operator responsible for dismantling the machine must:

For all the required procedures make use of the PPE shown in the above paragraph (K.2).

Create sufficient space around the machine to perform all movements without risks for persons.

Disconnect the power supply disconnectors of the machine and lock them in OFF position.

Disconnect the power supply cable from the disconnector, disconnecting first the power wires and
then the protective earth wire.

Only after performing all the above activities, proceed to dismantle the machine, working from top
down and paying special attention to machine parts/units that may fall due to gravity and all
components that may contain product residues.