Ragazzini RC2-Mxl, Инструкция по эксплуатации

Страница: 43 / 47

INSTRUCTIONS FOR USE
43
LM05EN002
K.4 SORTING THE MATERIALS
After dismantling the machine in accordance with the above indicated procedure, the various materials
must be sorted by type:

Remove the various machine parts from the working area, taking all the necessary precautions.

Before lifting very large parts, check that the lifting devices are correctly secured and use exclusively
adequate harnesses and lifting tackle.

Sort the various components by type, as far as possible. The parts should be sorted according to
material type (plastic, metal, etc.) and then discarded through waste sorting. The parts resulting from
the demolition of the machine should be consigned to an authorised waste sorting agency.
HANGING LOADS HAZARD:
Pay the utmost attention when lifting parts of the machine during demolition.
K.5 DISPOSING OF MACHINE MATERIALS AND PRODUCTS
The machine is made of non-hazardous materials, primarily: stainless steel, iron, aluminium, cast iron,
copper, plastic and rubber.
These materials are not subject to degradation such as to constitute a risk for operators.
The pump housing contains gear oil.
Prevent waste products from polluting the soil or aquifers and avoid that they are released into the
environment.
Disposal must be carried out in compliance with the national regulations in force in the country where the
machine is used. Dispose of lubricants in specific locations, intended for the specific purpose.
All electrical and electronic components are purchased by Ragazzini S.r.l. and have already been certified
in compliance with Directive 2011/65/EU (RoHS) by their respective manufacturers.
The materials used to protect the machine during transport must be recycled or discarded in compliance
with statutory legislation in the destination Country.
Pay attention to the symbol
Disposal must be entrusted to specialised agencies.