Rae QRAE PLUS PGM-2000, Руководство по эксплуатации и техническому обслуживанию

Страница: 54 / 88

PROGRAMMING
4-16
200 20
20 HIGH 23.5
35 10
10 LOW 19.5
100 15
STEL
35 10
TWA
OR
1.0 10
AVG
2. To modify these alarm limits, start at the left-most digit. Use
the [Y/+] or [N/-] key to change the digit value and press the
[MODE] key momentarily to advance the cursor one digit to
the right. Repeat this process until all the new Alarm limits
are entered. Press and hold the
[MODE] key for 1 second
to exit data entry mode. If there is any change to the existing
value, the display shows “Save?” Press the
[Y/+] key to
accept the new value and move to the next sub-menu.
Press the
[N/-] key to discard the changes.
3. To preserve the previously stored alarm limit, press and
hold the [MODE] key for 1 second and the monitor will exit
data entry mode and move to the next sub-menu.
Depending on the
selected averaging type
from the “Change
Averaging Method?”
menu (see Step 1).