Rae QRAE PLUS PGM-2000, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 88

PROGRAMMING
4-3
To enter the programming mode, hold down the [MODE] and
[N/-] keys simultaneously for three seconds. Depending on the
security level, the display will be different according to
Appendix A.
- Security “Level 0” - “Display Only! Cannot enter....”
- Security “Level 1” - “Enter Password = 0000”
- Security “Level 2” - Enters the programming menus
In security “Level 1”, after holding down the two keys for three
seconds, the display will show “Enter Password = 0000” with
the left-most digit flashing. Starting from this flashing digit, the
user should enter a password using the
[Y/+] and [N/-] keys.
To exit the programming mode and return to the normal
operation, press the
[MODE] key at any of the first tier menu
displays.
Note 1: Prior to factory shipment, the QRAE PLUS monitor was
installed with “0000” as the default password.
Note 2: For added security, “0000” is always displayed instead
of the actual password at this step.