Rae MultiRAE, Руководство пользователя

Страница: 25 / 93

MultiRAE
User’s Guide
23
6 Turning The MultiRAE On And Off
6.1 Turning The MultiRAE On
With the instrument turned off, press and hold the [MODE] key until the beep sounds and the display and LED
alarm lights turn on, and then release.
A RAE Systems logo (or a company name) should appear first. This is followed by a progression of
screens that tell you the MultiRAE’s current settings:

Product name and model number, air flow type, and serial number

Application firmware version, build date, and build time

Sensor firmware, build date, build time

Installed sensors (including serial number/production/expiration/calibration date and alarm limit
settings)

Current date, time, temperature, and relative humidity

User mode and operation mode

Battery type, voltage, shutoff voltage

Alarm mode and alarm settings

Datalog period (if it is activated) and interval

Policy Enforcement settings (whether calibration and/or bump testing are enforced)
Note: To speed up the startup time, the number of screens shown on startup can be reduced by enabling
the Fast Startup option under Programming/Monitor.
Then the MultiRAE’s main reading screen appears. It may take a few minutes for sensors to show a
reading, so if any have not warmed up by the time the main screen is shown, you will see “- - -” instead of
a numerical value until the sensor provides data (typically less than 2 minutes). Then it displays
instantaneous readings similar to the following screen (depending on the sensors installed) and is ready
for use.
Note: If the battery is completely empty, then the display briefly shows the message “Battery Fully
Discharged,” and the MultiRAE shuts off. You should charge the battery or replace it with a fully charged
battery before turning it on again.
6.2 Turning The MultiRAE Off
Press and hold [MODE]. A 5-second countdown to shutoff begins. You must hold your finger on the key
for the entire shutoff process until the MultiRAE is powered off.