manualshive.com logo in svg

Radware APSolute Vision, Руководство по установке и обслуживанию, Страница: 31 / 81

Поделиться
Скачать
Radware APSolute Vision Скачать руководство пользователя страница 31

APSolute Vision Installation and Maintenance Guide

Platforms

Document ID: RDWR_APSV_V400_IG1808

 31

Figure 22:  APSolute Vision ODS-VL2 Platform Back Panel

USB port for recovery. 

Status LEDs:

•

FAN—

Green indicates normal operation. Red indicates that one or more fans 

are not operating. 

•

SYS OK—

Green indicates normal operation. Red indicates that the platform 

is booting. Red or alternating red and green indicates a warning. 

•

PWR—

Green indicates normal operation. When the LED is red, a qualified 

service person should immediately check the power source and the power 
supply.

Table 4:  APSolute VisionODS-VL2 Platform Back Panel

Feature 

Description

Pluggable power supply.

Screws to ground the platform chassis to the rack. 

Pluggable fan module.
The pluggable fan module consists of three fans, attached to the back 
panel with three screws.

Table 3:  APSolute Vision ODS-VL2 Platform Front Panel 

Feature

Label/Description

Содержание APSolute Vision


















































































Отзывы:

Нет отзывов