manualshive.com logo in svg

Radware APSolute Vision, Руководство по установке и обслуживанию, Страница: 24 / 81

Поделиться
Скачать
Radware APSolute Vision Скачать руководство пользователя страница 24

APSolute Vision Installation and Maintenance Guide

24 

Document ID: RDWR_APSV_V400_IG1808

Hinweis:

 Dieses Gerät wurde geprüft und entspricht den Beschränkungen von digitalen Geräten der 

Klasse 1 gemäß Teil 15B FCC-Vorschriften und EN55022 Klasse A, EN55024; EN 61000-3-2; EN; IEC 
61000 4-2 to 4-6, IEC 61000 4-8 und IEC 61000-4- 11 für Konformität mit der CE-Bezeichnung. 
Diese Beschränkungen dienen dem angemessenen Schutz vor schädlichen Interferenzen bei Betrieb 
des Gerätes in kommerziellem Umfeld. Dieses Gerät erzeugt, verwendet und strahlt 
elektromagnetische Hochfrequenzstrahlung aus. Wird es nicht entsprechend den Anweisungen im 
Handbuch montiert und benutzt, könnte es mit dem Funkverkehr interferieren und ihn 
beeinträchtigen. Der Betrieb dieses Gerätes in Wohnbereichen wird höchstwahrscheinlich zu 
schädlichen Interferenzen führen. In einem solchen Fall wäre der Benutzer verpflichtet, diese 
Interferenzen auf eigene Kosten zu korrigieren.
ERKLÄRUNG DER VCCI ZU ELEKTROMAGNETISCHER INTERFERENZ

Figure 15:  Erklärung zu VCCI-zertifizierten Geräten der Klasse A

Übersetzung von 

Erklärung zu VCCI-zertifizierten Geräten der Klasse A

:

Dies ist ein Produkt der Klasse A gemäß den Normen des Voluntary Control Council for Interference 
by Information Technology Equipment (VCCI). Wird dieses Gerät in einem Wohnbereich benutzt, 
können elektromagnetische Störungen auftreten. In einem solchen Fall wäre der Benutzer 
verpflichtet, korrigierend einzugreifen.
Montieren und benutzen Sie das Gerät laut Anweisungen im Benutzerhandbuch.
KCC KOREA

Figure 16:  KCC—Korea Communications Commission Zertifikat für Rundfunk-und 

Nachrichtentechnik

Figure 17:  Erklärung zu KCC-zertifizierten Geräten der Klasse A

Übersetzung von 

Erklärung zu KCC-zertifizierten Geräten der Klasse A

:

Verkäufer oder Nutzer sollten davon Kenntnis nehmen, daß dieses Gerät der Klasse A für industriell 
elektromagnetische Wellen geeignete Geräten angehört und dass diese Geräte nicht für den 
heimischen Gebrauch bestimmt sind.
BSMI 

Содержание APSolute Vision


















































































Отзывы:

Нет отзывов