Radware APSolute Vision, Руководство по установке и обслуживанию, Страница: 29 / 81

Document ID: RDWR_APSV_V400_IG1808 29
CHAPTER 1 – PLATFORMS
This chapter describes the physical platform. It includes the following topics:
• The APSolute Vision Server ODS-VL Physical Platform, page 29
• The APSolute Vision Server ODS-VL2 Physical Platform, page 30
• DC Power Supply Connectors, page 32
The APSolute Vision Server ODS-VL Physical Platform
This section describes the APSolute Vision server ODS-VL physical platform.
Note: For more information on the APSolute Vision platform and the APSolute Vision server and
client software, see the APSolute Vision User Guide .
Figure 19: APSolute Vision ODS-VL Platform Front Panel
Table 1: APSolute Vision ODS-VL Platform Front Panel
Feature Label/Description
Power button. Turns power on and off. Pressing the button for 1 to 4 seconds
causes a graceful shutdown of the system, thus preserving system integrity.
Pressing the button for more than four (4) seconds causes the hardware to
power down.
Reset button. Resets the platform.
Serial RJ-45 port for out-of-band management.
Note: Radware supplies a RJ–45 to DE-9 adapter cable to connect the console
port of the platform to a console PC.
USB port for recovery and file transfer.
RJ-45 GbE ports for in-band management. The platform supports two RJ-45 GbE
ports for in-band management and APSolute Vision client.
LEDs:
• ACT—Flashing indicates activity.
• LINK—Green indicates 1000 Mbit/s. Yellow indicates 10 or 100 Mbit/s.
Status LEDs:
• PWR OK—Green indicates normal operation. When the LED is red, a qualified
service person should immediately check the power source and the power
supply.
• SYS OK—Green indicates normal operation. Red indicates that the platform
is booting. Red or alternating red and green indicates a warning (for
example, the temperature is high, but still in the allowed range).