RADWAG PUE C315, Руководство пользователя

Страница: 34 / 44

34
S_S Select to set sample mass by determining mass of a single part.
Suu Select to set sample mass by entering mass of a single part.

Press key to confirm, then continue weighing.
21.2. Setting Sample Mass by Entering Mass of a Single Part

Enter <3.2.PcS / 3.2.2.UUt> submenu, set <
Suu
> value.

Enter <PcS> working mode (parts counting), first, text <SEt_Ut>
is displayed for 1 s, next, window for entering mass value of a single part.

Enter the value and press key to confirm, the home screen
is displayed automatically along with quantity of parts loaded onto the
weighing pan (pcs).
If the value of entered single part mass is greater than max
capacity value, then message <Err Hi> is displayed.
21.3. Setting Sample Mass by Determining Mass of a Single Part

Enter <3.2.PcS / 3.2.2.UUt> submenu, set <
S_S
> value.

Enter <PcS> working mode (parts counting), blinking value of sample
quantity is displayed.

Press key to select one of the following options:
10 Reference sample quantity: 10 pcs.
20 Reference sample quantity: 20 pcs.
50 Reference sample quantity: 50 pcs.
100 Reference sample quantity: 100 pcs.
0000 Custom reference sample quantity - enter the required value yourself.

Set the respective option and press key to confirm, first, text <LoAd>
is displayed for 1 second, then the weighing window.

If the parts are to be weighed in a container, first put the container on
a weighing pan and tare it.

Load the weighing pan with declared amount of parts. When the indication
is stable ( pictogram is displayed) press key to confirm the mass.