- 77 -
*.csv (.) format (file that can be opened using Excel, the transferred decimal value
is separated using dot character), or
*.csv (,) format (file that can be opened using Excel, the transferred decimal value
is separated using coma character)
USB PC
– USB port type B, for connecting a computer with a dedicated RADWAG
software, e.g. PW WIN.
USB FREE LINK
– USB port, type B, for connecting a computer. Tool for entering data, it
functions as a keyboard. Upon proper modification of the printout and pressing declared
balance button (e.g. F1 header, F3 footer, ENTER printout), the data is directly entered to
computer programs, e.g. Excel, Word, Notepad etc.
Select <USB FREE LINK> port and configure its settings in order to enable correct
cooperation of the balance with computer programs:
SPREADSHEET – value ‘YES --.—‘ – cooperation with Excel type program, transferred
decimal values are separated by dot (.)
– value ‘YES --,--‘ – cooperation with Excel type program, transferred
decimal values are separated by coma (,)
– value ‘NO’ – cooperation with other programs (mass value
transferred in a form of text),
DELAY - if the transferred information is incomplete, i.e. part of it gets lost (due to auto-
entering or auto-formatting of data by computer program) during cooperation with Excel
type program, set the parameter value to <2>. If the transferred information is still
incomplete, the parameter value must be higher. The value ranges between 0 (quick data
transfer) and 9 (slow data transfer – around 10 characters per second).
CAUTION:
Example of the measurement printout is described in the PRINTOUTS section.
Additionally you can enter a controlling code (of a hexadecimal form) to a printer either at the
beginning of the printout - <P4.2.2 PREFIX> or at the end of it - <P4.2.3 SUFFIX>. Sending these
codes allows to control globally both, information and actions carried out at the beginning and/or at
the end of each printout sent from a balance to a printer.
This function is most frequently used to send an information about the code page of a printout sent
by a balance, at the beginning, and to send a command enabling the crop of a paper in EPSON
printers (if the printer is equipped with an autocutter blade), at the end.
<PREFIX> and <SUFFIX> parameters settings are valid for all the printouts sent from balance, e.g.
calibration reports, density, statistics etc., and for the header, footer and GLP printouts.
CAUTION:
It must be remembered that inserting paper crop command to <SUFFIX> parameter (control code) results in
sending the code after each printout. If the user wishes for one whole printout to consist of: HEADER, GLP
PRINTOUT and FOOTER and to be cropped underneath the FOOTER, then the paper crop command should
be inserted only for FOOTER settings as a non-standard printout with <%E> value (paper crop for EPSON
printer). In such a case <SUFFIX> command must remain empty.
To ensure correct cooperation of the balance with the printer (correct printout of diacritical signs of
a given language), respective baud rate obligatory for a given printer must be chosen (see the printer
settings). Additionally code page of a sent printout must be accordant with a code page of a printer.
Accordance of a code page may be obtained in two ways:
•
setting the right code page in the settings of a printer (see a user manual of the printer) – it
must be accordant with the printout code page of a balance (
1250
code page for POLISH,
CZECH, HUNGARIAN;
1252
for ENGLISH, GERMAN, SPANISH, FRENCH, ITALIAN;
1254
for
TURKISH),
•
sending the control code from the balance, which automatically sets the right code page of the
printer (code page accordant with the one of a balance) prior to printout of data taken from the
balance (this possibility is available only for printers with such option – see a user manual of the
printer).
Содержание PS 10100 R2
Страница 95: ...95...
