RADWAG PS 10100 R2, Руководство пользователя

Страница: 83 / 95

- 83 -
OUH Give value of max checkweighing threshold
SM Set mass value of a single item
TV Set target mass value
RM Set reference mass value
NB Give balance serial number
SS
Value release
IC Internal adjustment performance
IC1 Disable automatic internal adjustment of the balance
IC0 Enable automatic internal adjustment of the balance
K1 Lock balance keypad
K0 Unlock balance keypad
OMI Give available working modes
OMS Set working mode
OMG Give current working mode
UI
Give accessible units
US
Set unit
UG
Give current unit
BP Activate sound signal
PC Send all implemented commands
BN Give balance type
FS Give Max capacity
RV Give program version
A Set autozero function
EV Set ambient conditions state
FIS Set filter
ARS
Set value release
LDS Set last digit
NT Cooperation with PUE 7.1, PUE 10 terminal
CAUTION!
Each command must end with CR LF characters;
15.2. RESPONCE FORMAT
On receipt of a command, the terminal responds as follows:
XX_A CR LF command understood and in progress
XX_D CR LF command carried out (appears only after the command XX_A)
XX_I CR LF command understood but not accessible at this moment
XX _ ^ CR LF command understood but max threshold is exceeded
XX _ v CR LF command understood but min threshold is exceeded
XX _ OK CR LF command carried out
ES_CR LF command not recognised
XX _ E CR LF
time limit exceeded while waiting for stable measurement result
(time limit is balance characteristic parameter)
Where:
XX - name of a sent command
_ - spaces