LCT COUNTING SCALE
INSTRUCTION MANUAL
WWW.PHANTOMSCALES.COM
Страница 1: ...LCT COUNTING SCALE INSTRUCTION MANUAL WWW PHANTOMSCALES COM ...
Страница 2: ...ZERO KEY set or re adjust the scale in correct zero position for accurate counting operation K TARE KEY reduces the gross weight on the platter box or container etc as the tare weight L SAMPLE UNIT KEY is used when setting the counted sample numbers on the platter into scale memory UNIT WEIGHT KEY is used when setting the known unit weight data into scale in normal operation N CE KEY is used for c...
Страница 3: ...calibration is finished 6 Turn off the power then turn on the power again place some weight on the platform to make sure whether weighing is correct if not repeat steps 1 6 5 P MEMORY M KEY is used when accumulation the counts data this data are memorized by pressing this key and could be accumulated up to 99 counts Q MEMORY CANCEL MC KEY is used for canceling the memorized data R TOTAL KEY is use...
Страница 4: ...ited and upper limit repeat step 1 enter quantity alarm menu presses TARE key to selected when the display will show L 0000 L for flash press digital key input 990 then press TARE key again input lower limit is complete The display will show H 0000 H for flash press digital key input 1010 then press TARE key again input upper limit is complete 4 exit the quantity alarm menu press QTY SET key to ex...
