RADWAG MYA 0,8Y, Руководство пользователя

Страница: 19 / 132

- 19 -
7. WEIGHING
Simple weighing process is carried out using only the buttons located on the
right hand side of the balance terminal. The balance features separate buttons for
zeroing, tarring and generating a printout.
7.1. Zeroing process
Pressing the zeroing button causes determining a new zero point
for a balance. From now on mass of all loads placed on balance
weighing pan (including tare) is determined from this point. After
zeroing the displayed indication, the tare and net (gross) values
equals 0. A good weighing practice requires that before starting a
new process the indication is always zeroed by pressing the
zeroing button, and in particular before determining a tare value.
The zeroing range /- 2% of the maximum capacity of a
balance.
7.2. Tarring process
Press TARE button – pictogram “Net“ appearing on the display
informs that all mass indications are subject to applied tare, and
thus are “net” values.
Note: Tarring negative values is impossible and causes displaying an
error message. In such case zero balance indication and repeat tarring
process.
WEIGHING
Load an object to be weighed on balance weighing pan. On stabilization of
indication read the measured result. If prior to weighing process a TARE was applied,
the display indicates Net pictogram.