'Getting Started' | 7
RADVISION | User Guide for SCOPIA XT1000 Version 2.0
Setting the Language Interface
You may set the language interface in the Quick Setup Wizard or from the Main Menu page.
Procedure
Step 1
In the Main Menu page, select Settings, then press
User settings.
Step 2
The General page appears. Use the arrow keys to select the required language interface from the
drop-down list.
Step 3
Press
Save to save the new setting.
Activating the Screen Saver
Press
on the XT1000 Remote Control Unit and press
Shutdown no.
Note:
The screen saver automatically starts after the period of time set in User settings > User
preferences > General.
Entering Alphanumeric Characters
Use the XT1000 Remote Control Unit keypad or the virtual keyboard to type letters and digits.
Procedure
Step 1
Position the cursor in the input field.
Step 2
Press
on the XT1000 Remote Control Unit to change the input mode in the input field. The
available modes are: abc1 (letters, then digit); 1abc (digit, then letters); 123 (digits only); virtual
keyboard.
Step 3
When using the keypad of the XT1000 Remote Control Unit, press the relevant key to enter the
required letter or digit.
Step 4
When using the virtual keyboard, move the cursor over the required letter or digit and press
.
Press to delete the last entered character. Press
to close the virtual keyboard.
Содержание Scopia XT1000
Страница 1: ...SCOPIA XT1000 User Guide Version 2 0...
