background image

RADVISION | Maintenance Guide for SCOPIA Elite 5200 Series MCU Version 7.7

 

© 2000-2011 RADVISION Ltd. All intellectual property rights in this publication are owned by RADVISION Ltd and are 
protected by United States copyright laws, other applicable copyright laws and international treaty provisions. 
RADVISION Ltd retains all rights not expressly granted.
All product and company names herein may be trademarks of their registered owners.
This publication is RADVISION confidential. No part of this publication may be reproduced in any form whatsoever or used 
to make any derivative work without prior written approval by RADVISION Ltd.
No representation of warranties for fitness for any purpose other than what is specifically mentioned in this guide is made 
either by RADVISION Ltd or its agents.
RADVISION Ltd reserves the right to revise this publication and make changes without obligation to notify any person of 
such revisions or changes. RADVISION Ltd may make improvements or changes in the product(s) and/or the program(s) 
described in this documentation at any time.
If there is any software on removable media described in this publication, it is furnished under a license agreement 
included with the product as a separate document. If you are unable to locate a copy, please contact RADVISION Ltd and 
a copy will be provided to you.
Unless otherwise indicated, RADVISION registered trademarks are registered in the United States and other territories. 
All registered trademarks recognized.
For further information contact RADVISION or your local distributor or reseller.
Maintenance Guide for SCOPIA Elite 5200 Series MCU Version 7.7, August 2011
http://www.radvision.com
P/N 61546-00011

Содержание SCOPIA Elite 5200


















Отзывы: