Performing Hardware Maintenance | 7
RADVISION | Maintenance Guide for SCOPIA Elite 5200 Series MCU Version 7.7
P/N 61546-00011
Figure 1-3
Locating the fan drawer knobs
c.
Use the fan drawer knob as a handle and pull the fan drawer out of the chassis. When you pull
the tray out, you disengage it from its power connector and the fans slow down. See
.
Figure 1-4
Pulling the fan drawer out of the chassis
Warning
After you pull the fan drawer out of the chassis, the fans continue to rotate at high speed
for several seconds. To avoid injury, you must hold the fan drawer by its handle until the
fans stop rotating.
Step 3
Install the replacement fan drawer:
a.
Align the fan drawer so that it is in a vertical position on the tray guiding rails.
b.
Hold the tray in vertical position and check you do not insert it at an angle while you slide it
slowly and carefully onto the guiding rails.
Caution
Inserting the fan drawer at an angle or pushing the fan drawer into its slot using force can damage
the pins on the power connector.
c.
Make sure that the fan drawer is inserted up to the stop.
d.
Turn the fan drawer knob clockwise to lock the fan drawer in the chassis.
