RadiSys EXM-31 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 66

background image

EXM-31 Hardware Reference

Page iii

Hardware Warranty

RadiSys Corporation ("RadiSys") warrants the EPC system and component modules
to the original purchaser for two years from the product's shipping date. If an EPC
product fails to operate in compliance with its specification during this period,
RadiSys will, at its option, repair or replace the product at no charge. The customer
is, however, responsible for shipping the product; RadiSys assumes no responsibility
for the product until it is received. This warranty does not cover repair of products
that have been damaged by abuse, accident, disaster, misuse, or incorrect installation.

RadiSys' limited warranty covers products only as delivered. User modification, such
as the addition of memory arrays or other devices, may void the warranty, and if the
product is damaged during installation of the modifications, this warranty does not
cover repair or replacement.

This warranty in no way warrants suitability of the product for any specific
application.

IN NO EVENT WILL RADISYS BE LIABLE FOR ANY DAMAGES,
INCLUDING LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE PRODUCT EVEN IF RADISYS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY PARTY
OTHER THAN THE PURCHASER.

THE ABOVE WARRANTY IS IN LIEU OF ANY AND ALL OTHER WAR-
RANTIES, EXPRESSED OR IMPLIED OR STATUTORY, INCLUDING THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR USE, TITLE AND NONINFRINGEMENT. Repair or replacement
as provided above shall be the Purchaser's sole and exclusive remedy and RadiSys'
exclusive liability for any breach of warranty.

«
1
2
3
4
5
...
»

Содержание EXM-31



































































Отзывы:

Нет отзывов

Похожие инструкции для EXM-31

Бренд: MailASail Страницы: 2

Бренд: Pacific Crest Страницы: 2

Бренд: USR IOT Страницы: 52

Бренд: Dynamix Страницы: 2

PlantLinc PLR5000

Бренд: Data-Linc Group Страницы: 31

Бренд: Zte Страницы: 27

Бренд: Cermetek Страницы: 19

Бренд: Palm Страницы: 20

RolloHomeControl 8430-1

Бренд: RADEMACHER Страницы: 2

Бренд: Ebyte Страницы: 32

Бренд: C-motech Страницы: 15

Skywire LTE NL-SW-LTE-S7 Series

Бренд: NimbeLink Страницы: 16

Бренд: AirLive Страницы: 81

U.S. Robotics 56K Winmodem

Бренд: 3Com Страницы: 58

Бренд: XAVI Technologies Corp. Страницы: 71

Бренд: Sitecom Страницы: 12

Бренд: Sitecom Страницы: 17

Бренд: Maxis Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды