EPC-3221 CompactPCI
®
System Controller Board and C1XTN02 Transition I/O Module
24
Service Manual
Advanced
The options for the Advanced menu are listed in the following table:
Option / Sub-Menu
Item
Default Setting
Alternate Settings
ª
I/O Device
Configuration /
Integrated Peripherals
Serial Port A
Enabled (user configuration)
Disabled, Auto
Note: Base I/O Address and Interrupt are displayed / shown only if the
Serial Port is Enabled.
Note: For console redirection, select Enabled.
Note: If user wishes to use this port for Console Redirection, select
Enabled and set the I/O Address IRQ appropriately
Serial Port A: Base I/O Address/
IRQ
3F8/IRQ4
2F8/IRQ3, 3E8/IRQ4,
2E8/IRQ3
Serial Port B
Enabled
Disabled, Auto
Note: Base I/O Address and Interrupt are displayed / shown only if the
Serial Port is Enabled.
Note: For console redirection, select Enabled.
Note: If user wishes to use this port for Console Redirection, select
Enabled and set the I/O Address IRQ appropriately
Serial Port B: Base I/O Address/
IRQ
2F8/IRQ3
3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4
Serial Port B: Mode
Normal
Modem
Parallel Port
Enabled
Disabled, Auto
Note: Mode, Base I/O Address, and Interrupt are displayed / shown only
if the Parallel Port is Enabled.
Parallel Port: Mode
Bi-Directional
Output Only (ISA), EPP, ECP
Note: If Mode is set to ECP, a DMA channel must be set.
Parallel Port: Base I/O Address
378
278, 3BC
Parallel Port: Interrupt
IRQ 7
IRQ 5
Parallel Port: DMA Channel
DMA 1
DMA 3
Note: This option is displayed / shown only if Mode is set to ECP.
Floppy Disk Controller
Enabled
Disabled
Floppy Disk Controller:
Base I/O Address
Primary
Secondary
Local Bus IDE Adapter
Both
Disabled, Primary, Secondary
ª
Advanced Chipset
Control
ECC Configuration
EC
ECC, ECC Scrub, Disabled
Watchdog Timer Status
Disabled
Enabled
Watchdog Timer Delay
1.2 sec
150 ms
Note: For more information on the Watchdog Timer, see
page 43
.
Thermal Duty Cycle
37.5%
12.5%, 25%, 50%, 62.5%, 75%, 87.5%
ª
PCI Configuration
PCI IRQ Line 1 – 4
Auto Select (all IRQ lines)
Disabled, 3 (COM2/COM4),
4 (COM1/COM3), 5 (2nd LPT),
7 (1st LPT), 9 (Open), 10 (Open),
11 (Open), 12 (PS/2 Mouse),
14 (Primary IDE), 15 (Secondary IDE)
USB IRQ Enable
Yes
No
Note: The USB controller uses PCI IRQ line 4 (INTD).
Latency Timer
Auto (64)
32, 96, 128, 160, 192, 224
Cache Line Size
Auto (8)
8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48,
52, 56, 60
PCI/PNP ISA UMB Region
Exclusion:
C800–CBFF, CC00–CFFF,
D000–D3FF, D400–D7FF,
D800–DBFF, DC00–DFFF
Available (all regions)
Reserved
PCI/PNP ISA IRQ Resource
Exclusion:
IRQ 3, IRQ4, IRQ5, IRQ7,
IRQ9, IRQ10, IRQ11, IRQ12
Available (all IRQs)
Reserved
Embedded PCI Devices:
AGP VGA
Enabled
Disabled
Note: The video controller uses PCI IRQ line 1 (INTA).
Embedded PCI Devices:
Ethernet
Disabled
Enabled
Note: The ethernet controller uses PCI IRQ line 1 (INTA).
Embedded PCI Devices:
Ethernet Port
Front Panel
Chassis Panel
Embedded PCI Devices:
Adaptec Ultra-2 SCSI Adapter
Disabled
Enabled
Note: The SCSI controller uses PCI IRQ line 4 (INTD). The SCB will only
support SE Ultra SCSI, not LVD Ultra-2 SCSI.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
