EPC-3221 CompactPCI
®
System Controller Board and C1XTN02 Transition I/O Module
20
Service Manual
Step 5: Power-On the System
Overview
After you have installed the EPC-3221 and optional C1XTN02 Rear Transition I/O Module
and attached the peripheral devices, connect all power cords and power-on the system.
No Power
If the system does not power-on, check all power connections and the power source.
If power connections are secure and the power source is adequate, contact Technical Support.
See
Customer Support
on
page vi
.
Startup
After you power-on the system, it will:
•
Execute the Power-On Self Test (POST) to ensure that the system is functional and
properly configured
•
Start the operating system
Setup
During the POST, you can access the Setup Utility (
Figure 9
) to configure the system.
Figure 9. Setup Utility Main Menu
Before using the SCB for the first time, you should verify the system settings in the Setup Utility.
See
page 21
.
RadiSys CPD Setup Utility
Main
Advanced Security Power Boot Server Exit
Item Specific Help
System Time: [15:41:47]
System Date: [05/30/00]
Legacy Diskette A: [1.44/1.25 Mb 3½"] <Tab>, <Shift-Tab>, or
Legacy Diskette B: [Disabled] <Enter> selects field.
> Primary Master [Maxtor 7541 A]
> Primary Slave [None]
> Secondary Master [LS-120 CSMO 05]
> Secondary Slave [None]
> Cache Memory
> Boot Options
> Keyboard Features
Extended Memory: 63 MB
Memory Bank 0: Not Installed
Memory Bank 1: 64MB SDRAM
F1 Help
↑ ↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select > Sub-Menu F10 Save and Exit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
