RadiSys EPC-26A/27, Руководство пользователя

Страница: 23 / 86

BIOS Configuration
2 2
Page 17
Figure 2-9. Slot Numbering in an EMC chassis.
The standard chassis shown in Figure 2-9 may differ from your chassis. If you
are unsure about EXM slot numbering in your chassis, refer to the chassis’
specification sheet for information.
All slots not occupied by an EXM module should show an ID of FF and
OB1/OB2 of 00 00 indicating that no EXM is present
EXM Menu Entries for EPC-26A/27
There are two possible entries for the EPC-26A/27, depending on whether the
optional Flash/SRAM is present. These entries must be made for the exact
slot the
EPC-26A/27 occupies.
If no Flash/SRAM is present, use FF 00 00 for the ID/OB1/OB2 entries in that
slot.
If the optional Flash/SRAM is present, use FD 01 00 for the ID/OB1/OB2
entries in that slot.
EXM Menu Entries for Additional EXMs
For any additional EXMs installed in the chassis with the EPC-26A/27, consult
the hardware reference manual for ID/OB1/OB2 information regarding the
fields discussed below.
ID:
Enter the EXM-IDs for the EXMs you intend to install in this system. The
number of EXMs that can be installed depends on the chassis you are using.
Option Byte 1:/ Option Byte 2:
Each EXM expansion module has values you must enter for the option byte 1
and option byte 2 configuration data. When you are finished with this menu,
press the right arrow key to move to the Exit Menu, or press ESC.