RadiSys EPC-26A/27, Руководство пользователя

Страница: 10 / 86

EPC-26A/27 Hardware Reference
2 2
Page 4
MAKE SURE THAT POWER TO YOUR SYSTEM IS OFF
.
THE EPC IS
NOT DESIGNED TO BE INSERTED OR REMOVED FROM A LIVE
SYSTEM
.
WHEN INSERTING THE EPC
,
AVOID TOUCHING THE CIRCUIT BOARD
,
AND MAKE SURE THE ENVIRONMENT IS STATIC
-
FREE
.
INSERT IT WITH ADEQUATE CONTINUOUS FORCE RATHER THAN
TAPPING OR HAMMERING ON IT
.
BIOS Setup Screens
The EPC-26A/27's BIOS contains a setup function to display and alter the
system configuration. This information is maintained in the EPC-26A/27's
nonvolatile CMOS RAM and is used by the BIOS to initialize the hardware in
the EMC chassis.
The BIOS Setup can only be entered during the system reset process,
following a power-up, front panel reset, or equivalent. Press the F2 key when
prompted to enter Setup.
NOTE: The prompt to press the F2 key to enter the BIOS setup can optionally
be suppressed in the BIOS setup. However, you can still press the F2 key to
enter the BIOS setup screens, even if the prompt is suppressed.
Use the up and down cursor (arrow) keys to move from field to field. Use the
right and left arrows to move from menu to menu, as noted in the menu bar at
the top of the screen. If you use the arrow keys to leave a menu and then
return, your active field is always at the beginning of the menu. If you select a
sub-menu and then return to the main menu, you return to that sub-menu
heading.
Fields with a triangle to the left are actually sub-menu headings; press Enter
when the cursor rests on one of these headings to reach that sub-menu. For
most fields, position the cursor at the field and from the numeric keypad,
press the + and - keys to rotate through the available choices. Certain
numeric fields can also be entered via the keyboard. Once the entry has
been changed to appear as desired, use the up and down arrow to move to
the next field.