![background image](http://html1.mh-extra.com/html/radio-shack/pro-96/pro-96_owners-manual_3538402113.webp)
112
Manual Mode
Keystrokes
Function
Page
SCAN
Activates Scan Mode
49
MAN
Increments to the next channel memory
50
PGM
Activates Program Mode
30
WX
Activates Weather Mode
63
PRI
Toggles priority
40
TUNE
Enters Tune Mode
60
ATT
Toggles attenuation for selected channel, or, if global attenuation is set,
toggles global attenuation on or off
68
L/OUT
Toggles lockout on the selected channel
65
MODE
Cycles through valid modes for the selected channel, clears any stored CT
or DC settings
42
SRCH
Activates Search Mode
52
2, 3, MAN
Jumps to channel 23 in the current bank
30
1, 2, 3, MAN
Jumps to bank 1, channel 23
30
DECIMAL POINT
Toggles delay on selected channel on or off
65
ENTER
When monitoring a conventional channel that is programmed for CT or DC
Search Mode, stores a detected CT or DC code with the channel memory
51
π
or
θ
π
steps to the next channel,
θ
steps to the previous channel, hold down to
scroll
30
FUNC + MAN
Toggles digital AGC
78
FUNC + TRUNK
Enters trunked ID list for current bank
33
FUNC + PRI
Stores the frequency of the selected channel into the priority channel
41
FUNC + TUNE
Stores the frequency of the selected channel frequency into the tune
memory
60
FUNC + ATT
Toggles attenuator mode, normal or global
68
FUNC + 5
Toggles open or closed mode for current bank
83
FUNC + 9
Adjust display contrast, use
π
or
θ
then ENTER
71
FUNC + L/OUT
Jumps to the next locked out channel
66
FUNC +
π
or
θ
π
jumps forward to the next bank,
θ
jumps to the previous bank, hold down
to scroll
30