background image

 

 

20-428 Owner’s Manual 

 

Page 1 of 50   

RadioShack 
 
20-428 
PRO-2055 1,000 Channel Multi Trunking Mobile/Base Scanner 
 
Please read this user’s guide before installing, setting up and using your new product 

www.radioshack.com

 

 
 
Thank you for purchasing your Pro-2055 multi trunking scanner from RadioShack. You can mount 
your scanner in a fixed position and use it as a base scanner or you can use it as a mobile scanner by 
mounting it in a vehicle. This scanner is one of a new generation of scanners designed to track 
Motorola® Type I and II (such as Smartnet® and Privacy Plus®) and hybrid analog trunking 
systems, GE-Ericsson (EDACS®) type systems, and EF Johnson (LTR) type systems which are 
extensively used in many communication systems. No additional hardware or add-on cards are 
needed. 
 
what’s included 
 
user’s guide 

quick start guide  

preloaded data addendum 

Scanner  

Antenna 

DC cable w/fuse   

AC adapter 

DIN sleeve and keys (2)   

Mounting bracket 

Knob (2)  

Rubber washer (2) 

Lock washer (2) 

Screw (2) 

Rubber foot (3) 

 
contents 
 
will add 
 
© 2005 RadioShack Corporation. 
All Rights Reserved. 
 
RadioShack, RadioShack.com, Hypersearch, Hyperscan, and Adaptaplug are trademarks used by 
RadioShack Corporation. 
Motorola, Smartnet, ASTRO and Privacy Plus are registered trademarks of Motorola Inc. 
EDACS is a registered trademark of MA-COM Inc. 
LTR is a registered trademark of EF Johnson. 
 
 
 
your scanner’s keypad 
 
TRUNK – stores the Trunking ID code or holds the trunking ID while scanning. 

Summary of Contents for Pro 2055



















































Reviews: