![background image](http://html1.mh-extra.com/html/radio-shack/pro-96/pro-96_owners-manual_3538402080.webp)
79
Note
•
CLONE MODE Incorrect Model
appears if the scanner receives data from another
scanner other than a PRO-96.
Follow these steps to clone the data.
1. Turn on both scanners.
2. Connect the connecting cable to each scanner’s PC/IF jack.
CLONE MODE UP to
send, remove cable to exit
appears in the scanner’s display.
3. Press
π
.
Confirm send data? 1=YES Press other key for NO
. appears in the
scanner’s display.
4. Press 1 to send the data to the other unit or press any other key to cancel the
operation.
5. The scanner sends the data. Do not disconnect the PC/IF cable or interrupt power to
either scanner while the transfer is taking place.
6. To exit the clone mode, remove the cable.