0
Se
tt
in
gs
1
Se
tti
ng
s
To manually lock-out a channel, select the channel then
press
L/O
.
L/0
appears in the display.
n
Notes:
• Your scanner automatically locks out empty
channels.
• You can still manually select locked-out channels.
• You can lock-out a maximum of 50 frequencies
during a search. If you try to lock-out more,
L-O Fr-
FULL
appears.
• The scanner uses same lock-out list between the
Service Banks and Signal Stalker II.
Reviewing and Removing Lock-outs
Stored Channels
Manually select the channel and press
L/O
until
L/0
disappears.
Marine Service Bank
1.
Press
PSE
during the Marine Service Bank search.
2.
Press
e
or
d
to select channels manually.
L/0
appears next to locked-out channels.
.
To remove the lock-out, press
L/O
until
L/0
disappears.
Other Service Banks and Signal Stalker II
1.
Hold down
L/O
/
L/O RVW
for about two seconds
during a Service Bank or Signal Stalker II search.
2.
Press
e
or
d
repeatedly to scroll through the list of
locked-out frequencies.
L-r
and
L/0
appear in the
display.
.
Press
L/O
to remove the lock-out. The list scrolls to
the next locked-out frequency.
n
Notes:
• When you reach the highest locked-out frequency,
the scanner beeps twice and rolls to the lowest
locked-out frequency.
• If the
Service Bank
has no locked-out frequencies,
EMPty
appears.
Removing Lock-outs from All Frequencies in a Service
Bank
1.
Hold down
L/O
/
L/O RVW
for about two seconds
during a Service Bank or Signal Stalker II search.
L-r
appears.
2.
While holding down
TUNE/CLEAR,
press
L/O
.
FLo ALL
–
CL
appears for about two seconds.
Then the display alternates with
YES
---
Ent
and
No
--
CLEAr
.
.
Press
ENT
.
L-r EMPty
appears. The scanner clears
lock-outs from all frequencies in the Service Bank.
Using Priority
The priority feature sets the scanner to check one
channel every two seconds while scanning. You can
program one frequency into the priority channel.
1.
Press
PGM,
then press
PRI/ALERT.
PCH
and
000.000
0
or the previously stored frequency
appear.
2.
Enter the frequency you want stored in the priority
channel, then press
ENT
. The display flashes twice.
To turn on the priority feature, press
PRI/ALERT
during
scanning or searching.
PRI
appears. The scanner
checks the priority channel every two seconds and stays
on the channel if there is activity.
To turn off the priority feature, press
PRI/ALERT.
PRI
disappears.
To program a weather channel as the priority channel
(see
“Receiving All Weather Alerts “
on page 26).
