![background image](http://html1.mh-extra.com/html/radio-shack/make-it/make-it_user-manual_3393721003.webp)
3
Optical Sensor
Detection Range ................ 0.08 – 0.8 in (2 – 20mm)
Connect the optical sensor to the J9 pins on the
PCB using two 2-pin cables.
1234
3
4
1234
Note
: On the sensors, match the red wire to the
positive pin and the black wire to the negative pin.
On the PCB, the red wires should face toward the
center of the board.