![background image](http://html1.mh-extra.com/html/radio-shack/make-it/make-it_user-manual_3393721007.webp)
7
Download the Support Files
1.
For schematics and programs, go to
http://shack.net/MakeItRobotics
.
2.
At the end of the blog post, click
Make: it
Robotics Sensors Kit Support Files
and save
the folder to your computer.
3.
If you have not created a directory in your
Arduino folder for the Make: it Robotics
programs, open READ_ME.txt and follow the
directions.
4.
Connect your Arduino Uno R3 to your computer
with a USB cable.
5.
Remove the jumpers from J16 on the PCB
to allow your Arduino board’s USB port to
communicate with your computer.
J16 Jumper