11
USING KEY LOCK
You can lock
¿
/
,
À
/
SKIP,
QUIET/Q-
SCAN
, and
APO/HI/LO
on your trans-
ceiver to avoid accidentally pressing
them. Hold down
MON/FUNC
, then
press
LOCK/PTT
to lock or unlock
these keys.
When these keys are locked,
/2&.
/2&.
/2&.
/2&.
ap-
pears. If the key tone is on, an error
tone sounds when you press any of
these keys.
SETTING THE
COURTESY TONE
Hold down
LOCK/PTT
while turning on
the radio to turn the courtesy tone on
or off. A tone sounds. While the courte-
sy tone is on,
&
0
721(
&
0
721(
&
0
721(
&
0
721(
appears and the
party you are communicating with
hears the courtesy tone when you fin-
ish a transmission.
RESETTING THE
TRANSCEIVER
If the transceiver stops operating prop-
erly, hold down
QUIET/Q-SCAN
while
turning on the transceiver to reset the
transceiver. All the set channels are
cleared, the current channel is Chan-
nel 2, quiet codes are off, and key tone
and courtesy tone are on.
CARE
Keep the radio dry; if it gets wet, wipe it
dry immediately. Use and store the ra-
dio only in normal temperature envi-
ronments. Handle the radio carefully;
do not drop it. Keep the radio away
from dust and dirt, and wipe it with a
damp cloth occasionally to keep it
looking new.
Modifying or tampering with the radio’s
internal components can cause a mal-
function and might invalidate its war-
ranty and void your FCC authorization
to operate it. If your radio is not per-
forming as it should, take it to your lo-
cal RadioShack store for assistance. If
the trouble is affecting the telephone
lines, the phone company can ask you
to disconnect your radio until you have
resolved the problem.
