7
SETTING THE
CHANNELS
Channel 2 is preset to ON. Follow
these steps to set the channels to on
or off.
Note: If you do not set any channels
besides CH 2 to ON and you try to
scan the channels, an error tone
sounds. (See “Selecting a Channel”
chart on Page 10.)
1. To turn off the transceiver, rotate
OFF/VOL
counterclockwise until it
clicks.
2. Hold down
HI/LO/APO
and
QUIET/
Q-SCAN
while turning on the trans-
ceiver. The channel number
flashes.
21
21
21
21
or
2)
2)
2)
2)
appears to indi-
cate whether or not the channel is
selected.
3. Within 10 seconds, press
¿
/
or
À
/
SKIP
to select a channel. Then
repeatedly press
LOCK/PTT
to set
the selected channel to ON or
OFF.
21
21
21
21
appears when the chan-
nel is turned on, and
2)
2)
2)
2)
appears
when the channel is turned off.
4. To store the setting and exit the
channel set-up mode, press
MON/
FUNC
.
Note: If you do not press any key
for 10 seconds, the transceiver
automatically stores the setting
and exits the channel set-up
mode.
QUIET CODES
Quiet codes help eliminate interfer-
ence between different users on the
same frequency, letting you talk and
listen to people who are using other
transceivers set to the same frequency
and quiet code. This is like having a
sub-channel within a channel, giving
you greater communication flexibility.
When you set a quiet code (there are
38 to choose from) and turn on this
feature, the transceiver transmits a
tone with your transmission, letting you
communicate with anyone who has a
transceiver set to the same frequency
and code. This tone is too low for you
to hear, but other transceivers can de-
tect it.
If Quiet Code is turned on and set to
the same tone on the receiving trans-
ceiver, it only receives those transmis-
Ch.
#
Frequency
(MHz)
Color
TX Power
Hi
Lo
1
464.5000
Brown
5W
1W
2
464.5500
Yellow
5W
1W
3
467.7625
J
2W
1W
4
467.8125
K
2W
1W
5
467.8500
Silver
Star
2W
1W
6
467.8750
Gold
Star
2W
1W
7
467.9000
Red
Star
2W
1W
8
467.9250
Blue
Star
2W
1W
