Radio Flyer FLYER 840BL, Руководство пользователя

Страница: 11 / 27

11
Step 3: Install the front wheel
The bike is shipped with a spacer installed in the fork dropouts to prevent damage during
shipment. Prior to installing the front wheel, this spacer must be removed. Once removed,
the spacer may be discarded.
A. Squeeze the brake arms together, move the rotating metal linkage downwards, and
unhook the metal tube from the linkage to detach the two sides.
B. Remove the nuts and washers from both sides of the front wheel.
C. Align the wheel to the fork so that the fork dropouts rest on the axle. Ensure the fork
is fully seated on the axle, the wheel is centered on the fork, and the brake arms are
facing forwards.
D. Place the washers over the threaded ends of the front wheel hub, inserting the bent
tab into the hole on the fork dropouts. Tighten the nuts on each side of the front hub
to 28 to 32 Nm.
E. Press the brake arms together and attach the two sides using the rotating metal
linkage. Tune the brakes to ensure ideal performance (see Maintenance Instructions).
A
Continued on next page