Radio Flyer FLYER 840BL, Руководство пользователя

Страница: 20 / 27

20
A D J U S T I N G H A N D L E B A R R O TAT I O N A L P O S I T I O N
Following the initial assembly of the handlebar, the handlebar rotational position
should be adjusted for the rider. Ensuring that the handgrips and brake levers are in
the correct position will avoid any strain or discomfort while riding.
A. Using the provided 6mm allen wrench, loosen the two stem faceplate bolts.
B. Rotate the handlebar until the preferred position is achieved checking to ensure
the handlebar is centered left-to-right within the stem faceplate.
C. Retighten the two stem faceplate bolts using the 6mm allen wrench. Evenly
tighten the bolts to 10 to 12 Nm using a torque wrench.
A B
C
WARNING! The stem on your Flyer
T M
kids’ bike comes factory assembled to the front
fork, and does not need to be removed to adjust the handlebars. If the stem is loosened
or removed from the fork, care must be taken during re-assembly to avoid damaging
the stem-to-fork connection. Overtightening the stem clamp bolts can damage the
stem-to-fork assembly, which can lead to risk of injury. To avoid overtightening, use a
torque wrench to tighten the stem clamp bolts to 18 to 20 Nm.