Radio Flyer FLYER 840BL, Руководство пользователя

Страница: 13 / 27

13
Step 4: Install the saddle
A. Deploy the kickstand to allow the bike to stand freely.
B. Open the quick-release lever and insert the seat post into the seat tube.
C. Position the seat post at an appropriate height for the rider. See page 19.
D. Tighten the adjustment nut on the quick-release clamp, then close the
quick-release lever.
Note: Closing the quick release lever should require enough pressure that it leaves an imprint
in your hand. If it’s too easy or too difficult to close, adjust the lever tension by turning the
adjustment nut opposite the quick release lever.
WARNING! The seat post must be inserted to the minimum insertion mark. Do not
raise the seat post beyond the minimum insertion marking on the seat post tube. If the
seat post is not inserted properly, the seat may be loose which can lead to serious injury
or death. After assembly, reflectors should be visible and not obscured by the rear wheel.
A B
C
D