Radijator TKAN Integra Series, Инструкция по эксплуатации

Страница: 91 / 93

91
- does not bear the consequences of possible contamination of the boiler or explosion
of water vapor which can cause material damage and human casualties.
4.
Warranty period isn’t valid:

if it is found out that malfunctions were removed by an unauthorized person or an
unauthorized maintenance department,

if some air containing water and oil enters the exchanger space,

if during the repair the original parts were not used and installed,

upon the expiration of the warranty period.
5. When reporting malfunctions, it is mandatory to provide the following information:

name and type of the product,

date of purchase,

factory or workshop number of the fireplace,

brief malfunction description, that is the description of a defect,

exact address and contact number, mail.
6. Regular yearly maintenance
Regular maintenance is done at the end of each heating season from April 15th to August
31st and is charged according to the set price list of Radijator inzenjering company. The
maintenance procedure, performed by technicians performing regular yearly maintenances
authorized by the company, include the following operations:
NOTICE: The servicing technician is obliged to inspect all listed parts
(from the list) of the dosing unit and exchanger and if it comes to the
replacement of any parts the user receives the aforementioned warranty and
the additional 12-month warranty for the boiler body (exchanger) as well.
The warranty can be extended up to 5 years from the initiation date. The
maintenance and extension can be done by the person sent by the central
maintenance department of Radijator inzenjering. The warranty isn’t valid
to unchanged parts upon completing maintenance.
Maintenance procedure:
1. Disassembling the pellet silo from the pellet transporter;
2. Disassembling the pellet transporter from the boiler;
3. Removing both chains, sprockets and bearings from the furnace;
4. Disassembling combustion parts from the furnace and cleaning the space beneath the
boiler parts for cleaning; Inspecting the condition of parts and the gap between them;
5. Cleaning the space of pipes where the lower screw spiral rotates;