Radijator BIOmax PRO 25 Скачать руководство пользователя | Manualshive

Страница: 72 / 75

background image

71

Radijator Inženjering DOO, 36000 Kraljevo, Živojina Lazića Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150,

www.radijator.rs

, e-mail: [email protected]

13. Warranty

1.

Co. ”Radiator Engineering” covers different warranty periods for different parts (as
specified further on) only if the following conditions of guarantee are fulfilled:

1.1.

The boiler must be connected to the aforementioned hydraulic schemes of technical
instruction, especially pay attention to the safety valves, thermal fuse swelling, the
range of work pressure of boiler operating temperature of the boiler, the conditions in
the boiler room, etc.

1.2.

The boiler must be connected to the chimney of prescribed cross-section,
characteristics of insulation and height.

1.3.

Flue gas outlet from boiler to the chimney must be constructed according to the
technical instructions.

1.4.

The said electrical connections must be done on the boiler according to the technical
instructions, particularly this refers to the characteristics of the room thermostat, the
characteristics of the power supply, which must be within certain limits.

1.5.

The user must follow the following instructions on how to use and maintain the boiler.

2.

Warranty statement

We herewith declare:



The product has the prescribed and declared quality properties. We are committed, we
will, on the request of the buyer, if he timely submits the Request for the repair within
the warranty period, do at any expense all repairs, so that the product will operate in
accordance with the declared properties;



that the product is will operate flawlessly within the warranty period if the instructions
for the use, installation and operation are respected;



that in the warranty period will be ready to remove all product failures and keep in stock
all the necessary spare parts;



warranty period starts from the DATED OF PURCHASE AND LASTS FOR 60
MONTHS, from the date of manufacture (the date of manufacture is located on
the label on the back of the boiler),



60 MONTHS WARRANTY VALID ONLY IF THE BOILER service regularly by
the central service RADIJATOR INŽINJERING”, within the period specified for
the same (in text below),



Warranty is valid if the warranty card is stamped by the Seller, with the registered
date of purchase and the attached Sale Invoice/Bill. IT IS ALSO IMPORTANT
TO HAVE THE ORDER FOR COMMISSIONING (certified by the Service).

3.

The Guarantee period of one year applies to the following parts:



all bearings of the series UCFL,



electric heaters firing,



Bearings of the cellular security conveyor (valvole).

«
...
70
71
72
73
74
...
»

Содержание BIOmax PRO 25












































































Отзывы:

Нет отзывов

Похожие инструкции для BIOmax PRO 25

Бренд: RBI Страницы: 32

Бренд: QHT Страницы: 52

LOGIC HEAT2 H12

Бренд: Ideal Heating Страницы: 8

LOGIC COMBI2 C24

Бренд: Ideal Heating Страницы: 10

WBS Active seried

Бренд: Sun System Страницы: 16

Бренд: ADVANCE Easy Moving Страницы: 20

Chef's Line CLCHRBL Series

Бренд: Eagle Group Страницы: 16

Бренд: ARCA Страницы: 26

Бренд: Market Forge Industries Страницы: 26

Бренд: termovana Страницы: 31

Proteus Premix PPR 14 HCH

Бренд: E.C.A. Страницы: 42

Бренд: Climit Страницы: 116

Бренд: Vapac Страницы: 31

Бренд: Potterton Страницы: 43

LOGIC MAX HEAT2 H12

Бренд: Ideal Heating Страницы: 8

Classic RS 245 P

Бренд: Ideal Boilers Страницы: 28

Vitocrossal 200 CM2 186

Бренд: Viessmann Страницы: 64

Бренд: Viessmann Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды