Radijator BIO Lux UNI 20, Инструкция по эксплуатации

Страница: 44 / 57

96
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
8.5 Maintenance of boiler
BIO
lux
UNI 20
.
Boiler
BIO
lux
UNI 20
requires daily and periodic cleaning.

Daily cleaning also refers to the area of the combustion chamber ie. Combustion cup
where by the constant ejection of ash allows a better working of electric heaters for
firing and a better combustion ie. A bigger amount of air through the slits in the cup.
Also, the ash, even in the course of a day begins to accumulate on the bottom, the
space around the combustion space. At the average parameters of combustion of 100
kg of pellets 1 kg of ash produced.

In every 3 to 4 days it is necessary to clean the space of combustian chamber (figure
23). Also it is necessary to clean the deposits on the walls of the firebox. By this we
provide a better transfer as one millimeter layer of tar and soot decreases the
conductivity by 5%.

Once in every two weeks it is necessary to open the top cover for cleaning, remove
the turbulators and from the whole available part of the boiler remove tar and soot
(Figure 23). All that is removed can be picked off through the combustion chamber.
Also, at that time, flue gas pipe should be removed from the rear of the boiler as to be
cleaned from ashes and soot (NOTE: Pay attention to the probe for the flue gases
when removing the chimney).
If, during the cleaning in the boiler there appears the condensation it is necessary to collect the
condensed matter and the whole boiler inside should be coated by base means for cleaning or
else by means of water solution of constyruction lime. In this way the neutralization of acids is
carried out due to condensation.
While maintaining and servicing the boiler, the boiler is to be switched off
the power supply.
96
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
8.5 Maintenance of boiler
BIO
lux
UNI 20
.
Boiler
BIO
lux
UNI 20
requires daily and periodic cleaning.

Daily cleaning also refers to the area of the combustion chamber ie. Combustion cup
where by the constant ejection of ash allows a better working of electric heaters for
firing and a better combustion ie. A bigger amount of air through the slits in the cup.
Also, the ash, even in the course of a day begins to accumulate on the bottom, the
space around the combustion space. At the average parameters of combustion of 100
kg of pellets 1 kg of ash produced.

In every 3 to 4 days it is necessary to clean the space of combustian chamber (figure
23). Also it is necessary to clean the deposits on the walls of the firebox. By this we
provide a better transfer as one millimeter layer of tar and soot decreases the
conductivity by 5%.

Once in every two weeks it is necessary to open the top cover for cleaning, remove
the turbulators and from the whole available part of the boiler remove tar and soot
(Figure 23). All that is removed can be picked off through the combustion chamber.
Also, at that time, flue gas pipe should be removed from the rear of the boiler as to be
cleaned from ashes and soot (NOTE: Pay attention to the probe for the flue gases
when removing the chimney).
If, during the cleaning in the boiler there appears the condensation it is necessary to collect the
condensed matter and the whole boiler inside should be coated by base means for cleaning or
else by means of water solution of constyruction lime. In this way the neutralization of acids is
carried out due to condensation.
While maintaining and servicing the boiler, the boiler is to be switched off
the power supply.
96
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
8.5 Maintenance of boiler
BIO
lux
UNI 20
.
Boiler
BIO
lux
UNI 20
requires daily and periodic cleaning.

Daily cleaning also refers to the area of the combustion chamber ie. Combustion cup
where by the constant ejection of ash allows a better working of electric heaters for
firing and a better combustion ie. A bigger amount of air through the slits in the cup.
Also, the ash, even in the course of a day begins to accumulate on the bottom, the
space around the combustion space. At the average parameters of combustion of 100
kg of pellets 1 kg of ash produced.

In every 3 to 4 days it is necessary to clean the space of combustian chamber (figure
23). Also it is necessary to clean the deposits on the walls of the firebox. By this we
provide a better transfer as one millimeter layer of tar and soot decreases the
conductivity by 5%.

Once in every two weeks it is necessary to open the top cover for cleaning, remove
the turbulators and from the whole available part of the boiler remove tar and soot
(Figure 23). All that is removed can be picked off through the combustion chamber.
Also, at that time, flue gas pipe should be removed from the rear of the boiler as to be
cleaned from ashes and soot (NOTE: Pay attention to the probe for the flue gases
when removing the chimney).
If, during the cleaning in the boiler there appears the condensation it is necessary to collect the
condensed matter and the whole boiler inside should be coated by base means for cleaning or
else by means of water solution of constyruction lime. In this way the neutralization of acids is
carried out due to condensation.
While maintaining and servicing the boiler, the boiler is to be switched off
the power supply.