90
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića
- Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: [email protected]
After that, also, with keys P4 or P6
you pass from ON to OFF, confirm
with key P3
. The feeder stops working. With key P1
exit the sub-menu.
Figure 22. View of display when selecting the function LOAD
STEP 5: Start up of boiler
BIO
lux
UNI 20
.
Procedure:
Press the key P2
, hold pressed for 2-3 seconds until the beep signal. Then on the
display there is the text IGNITION (Figure 14-State of system). The Boiler Stove
started working.
In the conditions when the pellet is according to the standards and when all other
requirements are met for chimney and air flow, the combustion process begins in 5 to 10
min.
During the first firing some increased presence of smoke and the sharp smell should be
expected until the factory coatings against corrosion end or until the final drying or stove
being heated.
The same procedure is used for extinguishing the boiler
BIO
lux
UNI 20
, so by a
prolonged pressing of the key P2
until the beep sound is heard, then on the
display is the text Extinguish. (Figure 16-State of system ), we pass to extiguishing of
the boiler
BIO
lux
UNI 20
.
