Radicon J 100, Руководство пользователя

Страница: 18 / 76

14
SERIES J
DIMENSIONS - SINGLE REDUCTION
KIBO
J11 - 71 Single Reduction
Size Ratio A AC C
1
J K
L
M N P R T T1 T2 T3 S
2
U V W
Size Ratio X Y Z
F
6
H
7
G FA D
3,8
B
4
E kg
Shaft sleeve
5
Input shaft
Weight
notes
1. The V-belt pulley should be placed as close to the housing
as possible.
2. These dimensions are minimum diameters of driven
pulley to prevent overloading of the bearings.
3. Tolerances according to ISO H7.
4. Tolerances according to ISO E9.
max min
Please note: Dimensions R, T, T1, T2, T3
are not machined, deviations can occur.
RP
0201
5. The reducer should normally be mounted on a shaft
with tolerance ISO js6. On heavy duty applications
closer tolerances are recommended.
6. Tolerances according to ISO js6.
7. Tolerances according to ISO h9.
8. Space for spacer if locking ring is used.
J11A 4.94:1 116 11.6 36.4 65 83 350 240 12 14 40 76 47 62 87 102 140 200 108 83
J11B 4.94:1 116 11.6 36.4 65 83 350 240 12 14 40 76 47 62 87 102 140 200 108 83
J21A 5.00:1 136 12.2 46 81 100 400 280 16 18 48.8 86 51 69 93 112 160 236 118 99
J21B 5.00:1 136 12.2 46 81 100 400 280 16 18 48.8 86 51 69 93 112 160 236 118 99
J31A 5.00:1 148 15.5 54 84 114 400 280 16 18 58 104 56 78 109 131 180 272 134 120
J31B 5.00:1 148 15.5 54 84 114 400 280 16 18 58 104 56 78 109 131 180 272 134 120
J51A 5.08:1 168 16.4 72.6 105 138 460 330 20 22 61 104 68 93 124 149 355 320 160 146
J51B 5.08:1 168 16.4 72.6 105 138 460 330 20 22 61 104 68 93 124 149 355 320 160 146
J71A 4.94:1 182 19.5 72.5 114 166 460 330 20 22 67.5 134 64 89 127 152 355 388 200 167
J71B 4.94:1 182 19.5 72.5 114 166 460 330 20 22 67.5 134 64 89 127 152 355 388 200 167
J11A 4.94:1 272 15 28 19 6 21.5 - 35 10 38.3 3.6 16
J11B 4.94:1 272 15 28 19 6 21.5 - 45 14 48.8 3.6 16
J21A 5.00:1 318 15 35 24 8 27 - 45 14 48.8 3.9 24
J21B 5.00:1 318 15 35 24 8 27 - 55 16 59.3 3.9 24
J31A 5.00:1 360 20 31 28 8 31 - 55 16 59.3 6 35
J31B 5.00:1 360 20 31 28 8 31 - 65 16 69.4 6 35
J51A 5.08:1 443 20 40 38 10 41 M8 60 18 64.4 7.4 53
J51B 5.08:1 443 20 40 38 10 41 M8 75 20 79.9 7.4 53
J71A 4.94:1 508 24 48 42 12 45 M8 70 20 74.9 12.5 82
J71B 4.94:1 508 24 48 42 12 45 M8 85 22 90.4 12.5 82